Automatic Shrinkable Sleeve Labeling Machine

Introduction:

The machine is suitable for the automatic shrinkage and the thermal contraction of various shaped bottles, such as round bottles, square bottles, flat bottles and curved bottles.

1. Synchronized mechanism transmission, any transmission belt replacement can be completed quickly, with traditional multi-layer arm type (replacement and repair takes more than six hours) is easy to maintain, simple maintenance, no affect production

2. Single shrink label feed plate design, height is moderate, easy to install labels, micro-computer automatic calculation, only adjust through touch screen, the label can be automatically detected, automatic positioning,The change of label is absolutely fast and labor-saving, and the cut-off position is absolutely accurate

3. Feeding label mechanism: power synchronous tension control supply label, supply capacity of 90 m/min, label supply plate 500mm, paper tube diameter 4', 8', 10' are all available, feed the standard stable tension mechanism design, to ensure the accuracy of the cut length, supply stability, fast, ensure the accuracy of the delivery and shooting

4. Servo control feeding label parts of the center guide column, feeding label speed of 80 bottles/min

5. The new knife design uses a servo motor drive, high speed, stable and accurate movement, flat cut, shrink beautiful, with label synchronous positioning mechanism, cut positioning accuracy of up to 1mm.

6. Multi-point emergency stop button, can be installed in the appropriate position on the production line emergency stop button, so that online production is safe, production smoothly.

7. Special design steam shrink tunnel, the use of high-pressure fan, special heat wind shrink ring wind channel more energy-saving, shrinking effect is unparalleled, can shrink the curve bottle, by this hot air-type shrink furnace can get a satisfactory flat contraction effect for our customer.

8. New design steam shrink furnace, heat shrink age greatly improved, for different and irregular round bottles, square bottles, flat bottles and other bottle shape, adjustment, maintenance convenience, shrink flat, steam sprinkling mode using steam package design type, pipe smooth lying does not occupy space, spray outlet is divided into four segments, each segment of the high and low, front and rear and gas emission can be adjusted separately, To achieve the most perfect shrinkage effect. Low-pressure steam package using seamless steel pipe design, each connection pipe using stainless steel hose quick connector, easy to remove, installation. The full machine shell is made of stainless steel and kept warm, not only save energy, and meet international safety standards, the bottom stainless steel water tray concentrated condensate, can take over the discharge, the working environment is not affected, the box is attached to the window before and after two. The whole machine adopts waterproof design, for stainless steel composition, easy to operate and repair.

Main technical parameters:

Include 3 parts: Automatic shrink sleeve labeling machine, steam shrink tunnel with1.8meters, and total length 7 meters conveyor belt.

Voltage: AC220V, 50/60HZ, 2.5KW,

Label standard length of 100mm, production speed can be based on customer needs The shorter the label length the faster the production speed

Application bottle: Æ28mm -Æ125mm 

Application label: length-30mm -250mm

Application label thickness: 0.035mm ~ 0.13mm

Application label materials: PVC、PET、OPS

Automatic shrink sleeve machine size: L2000mm*W850mm*H2000mm

Steam shrink tunnel size: L2000mm＊W500mm＊H1600mm

Steam shrink tunnel Power: 10KW-15KW

Steam shrink tunnel:

About Packing:

To ensure our service quality, we will execute the following packaging standards in delivery:

1. All machines before shipping should be tested pass, wiped up and clean, wrapped by stretch film to protect it from moist. The precision part need to be flexible package.

2.All machines will be packed in wooden case.  The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.

Our service:

1. BoJun Pack commit that supply the whole system and machines can fulfill customer requested, include capacity, function, Industry standard, and finish the whole system test then shipping

2. On-site Installation, but the fees including air tickets, round air tickets, foods, hotel and translator in this period should be paid by buyer, the subsidy is 100USD/day

3. Technical Support, BoJun Pack support of the whole use life of the system, including the capping machine, and the procedures

4. Spare parts supply, BoJun Pack designed quick install spare parts in machines, quick installation,and easy to change products, In the quality guarantee period, BoJun Pack supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation. After the guarantee period, will supply all the parts that user need for the whole use life of the machine in cost price.